TikZ-decoration: control decoration amplitude along curveRandomly curved arrows in TikZCombine tikz curve with random variationTiKZ decoration doesn't workModify TikZ coil decorationHow to insert math with curly brackets into tikz decoration text along path?TikZ: node along decorationTruncate tikz snake decoration without changing frequencyPGF Decoration: how to remember a point between decoration states?Scale a decoration in TikZTikZ path decoration: text below pathTikz; decoration with rounded cornersCombine tikz curve with random variation
Do US professors/group leaders only get a salary, but no group budget?
The average age of first marriage in Russia
Can a wizard cast a spell during their first turn of combat if they initiated combat by releasing a readied spell?
Can other pieces capture a threatening piece and prevent a checkmate?
Why is there so much iron?
Do I need to consider instance restrictions when showing a language is in P?
Does the attack bonus from a Masterwork weapon stack with the attack bonus from Masterwork ammunition?
Usage and meaning of "up" in "...worth at least a thousand pounds up in London"
Why is indicated airspeed rather than ground speed used during the takeoff roll?
How can an organ that provides biological immortality be unable to regenerate?
How does one measure the Fourier components of a signal?
Turning a hard to access nut?
gerund and noun applications
Wrapping homogeneous Python objects
What are idioms that are antonymous to "don't skimp on"?
Worshiping one God at a time?
Differential and Linear trail propagation in Noekeon
Is it true that good novels will automatically sell themselves on Amazon (and so on) and there is no need for one to waste time promoting?
What can I do if I am asked to learn different programming languages very frequently?
Is there a hypothetical scenario that would make Earth uninhabitable for humans, but not for (the majority of) other animals?
Help rendering a complicated sum/product formula
Is there a term for accumulated dirt on the outside of your hands and feet?
World War I as a war of liberals against authoritarians?
Hausdorff dimension of the boundary of fibres of Lipschitz maps
TikZ-decoration: control decoration amplitude along curve
Randomly curved arrows in TikZCombine tikz curve with random variationTiKZ decoration doesn't workModify TikZ coil decorationHow to insert math with curly brackets into tikz decoration text along path?TikZ: node along decorationTruncate tikz snake decoration without changing frequencyPGF Decoration: how to remember a point between decoration states?Scale a decoration in TikZTikZ path decoration: text below pathTikz; decoration with rounded cornersCombine tikz curve with random variation
Working with path decorations based on this solution provided by marmot I am searching for a possibility to change the decorations amplitude along the graph.
Having this plot
applying the mentioned decoration gives
which is exactly what the decoration is supposed to do.
In fact the required curve should look like this one:
The last output has been created by manually searching the correct positions to manipulate the amplitude which is a "trial and error" method. Changing the dimensions of the tikzpicture will then give a false result, fx
Now the basic idea is to provide a separate path (which can be made visible during development) to control the decorations amplitude along the original (blue) curve. In this case the control path (red) would be quite simple:
The control path could be interpreted as a factor to the decorations amplitude that can be set via decoration=amplitude=.
Assuming this method would be quite handy I'm a bit stunned it is not available in TikZ - or have I overseen it? And if it's not: how can I get the y-value of the control curve within the statestep portion of the decorations definition?
The MWE producing all the above graphs (even if not nicely coded in terms of efficiency and structural beauty):
documentclassarticle
usepackagetikz
usetikzlibrarycalc,decorations.pathmorphing
newcounterrandymark
newcommandamplitudesetter
pgfdeclaredecorationmark random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymarkamplitudesetter
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
begindocument
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[blue!80!black,thick] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
renewcommandamplitudesetter%
pgfdecorationsegmentamplitude=0.75mm
ifnumvaluerandymark<48pgfdecorationsegmentamplitude=0.7mmfi%
ifnumvaluerandymark<46pgfdecorationsegmentamplitude=0.6mmfi%
ifnumvaluerandymark<44pgfdecorationsegmentamplitude=0.5mmfi%
ifnumvaluerandymark<42pgfdecorationsegmentamplitude=0.4mmfi%
ifnumvaluerandymark<40pgfdecorationsegmentamplitude=0.3mmfi%
ifnumvaluerandymark<38pgfdecorationsegmentamplitude=0.2mmfi%
ifnumvaluerandymark<36pgfdecorationsegmentamplitude=0.1mmfi%
ifnumvaluerandymark<34pgfdecorationsegmentamplitude=0mmfi%
ifnumvaluerandymark<8pgfdecorationsegmentamplitude=0.75mmfi%
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=2.5mm,y=2.5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
renewcommandamplitudesetter%
pgfdecorationsegmentamplitude=0.75mm
ifnumvaluerandymark<48pgfdecorationsegmentamplitude=0.7mmfi%
ifnumvaluerandymark<46pgfdecorationsegmentamplitude=0.6mmfi%
ifnumvaluerandymark<44pgfdecorationsegmentamplitude=0.5mmfi%
ifnumvaluerandymark<42pgfdecorationsegmentamplitude=0.4mmfi%
ifnumvaluerandymark<40pgfdecorationsegmentamplitude=0.3mmfi%
ifnumvaluerandymark<38pgfdecorationsegmentamplitude=0.2mmfi%
ifnumvaluerandymark<36pgfdecorationsegmentamplitude=0.1mmfi%
ifnumvaluerandymark<34pgfdecorationsegmentamplitude=0mmfi%
ifnumvaluerandymark<8pgfdecorationsegmentamplitude=0.75mmfi%
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw [red,thick,name=amplitudecontrol] (0,1) -- (2,1) -- (2,0) -- (7,0) -- (12,1) -- (25,1);
draw[blue!80!black,thick] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
endtikzpicture
enddocument
tikz-pgf decorations tikz-decorations
asked 14 hours ago
AndiWAndiW
3741212
add a comment |
Working with path decorations based on this solution provided by marmot I am searching for a possibility to change the decorations amplitude along the graph.
Having this plot
applying the mentioned decoration gives
which is exactly what the decoration is supposed to do.
In fact the required curve should look like this one:
The last output has been created by manually searching the correct positions to manipulate the amplitude which is a "trial and error" method. Changing the dimensions of the tikzpicture will then give a false result, fx
Now the basic idea is to provide a separate path (which can be made visible during development) to control the decorations amplitude along the original (blue) curve. In this case the control path (red) would be quite simple:
The control path could be interpreted as a factor to the decorations amplitude that can be set via decoration=amplitude=.
Assuming this method would be quite handy I'm a bit stunned it is not available in TikZ - or have I overseen it? And if it's not: how can I get the y-value of the control curve within the statestep portion of the decorations definition?
The MWE producing all the above graphs (even if not nicely coded in terms of efficiency and structural beauty):
documentclassarticle
usepackagetikz
usetikzlibrarycalc,decorations.pathmorphing
newcounterrandymark
newcommandamplitudesetter
pgfdeclaredecorationmark random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymarkamplitudesetter
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
begindocument
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[blue!80!black,thick] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
renewcommandamplitudesetter%
pgfdecorationsegmentamplitude=0.75mm
ifnumvaluerandymark<48pgfdecorationsegmentamplitude=0.7mmfi%
ifnumvaluerandymark<46pgfdecorationsegmentamplitude=0.6mmfi%
ifnumvaluerandymark<44pgfdecorationsegmentamplitude=0.5mmfi%
ifnumvaluerandymark<42pgfdecorationsegmentamplitude=0.4mmfi%
ifnumvaluerandymark<40pgfdecorationsegmentamplitude=0.3mmfi%
ifnumvaluerandymark<38pgfdecorationsegmentamplitude=0.2mmfi%
ifnumvaluerandymark<36pgfdecorationsegmentamplitude=0.1mmfi%
ifnumvaluerandymark<34pgfdecorationsegmentamplitude=0mmfi%
ifnumvaluerandymark<8pgfdecorationsegmentamplitude=0.75mmfi%
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=2.5mm,y=2.5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
renewcommandamplitudesetter%
pgfdecorationsegmentamplitude=0.75mm
ifnumvaluerandymark<48pgfdecorationsegmentamplitude=0.7mmfi%
ifnumvaluerandymark<46pgfdecorationsegmentamplitude=0.6mmfi%
ifnumvaluerandymark<44pgfdecorationsegmentamplitude=0.5mmfi%
ifnumvaluerandymark<42pgfdecorationsegmentamplitude=0.4mmfi%
ifnumvaluerandymark<40pgfdecorationsegmentamplitude=0.3mmfi%
ifnumvaluerandymark<38pgfdecorationsegmentamplitude=0.2mmfi%
ifnumvaluerandymark<36pgfdecorationsegmentamplitude=0.1mmfi%
ifnumvaluerandymark<34pgfdecorationsegmentamplitude=0mmfi%
ifnumvaluerandymark<8pgfdecorationsegmentamplitude=0.75mmfi%
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw [red,thick,name=amplitudecontrol] (0,1) -- (2,1) -- (2,0) -- (7,0) -- (12,1) -- (25,1);
draw[blue!80!black,thick] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
endtikzpicture
enddocument
tikz-pgf decorations tikz-decorations
asked 14 hours ago
AndiWAndiW
3741212
add a comment |
Working with path decorations based on this solution provided by marmot I am searching for a possibility to change the decorations amplitude along the graph.
Having this plot
applying the mentioned decoration gives
which is exactly what the decoration is supposed to do.
In fact the required curve should look like this one:
The last output has been created by manually searching the correct positions to manipulate the amplitude which is a "trial and error" method. Changing the dimensions of the tikzpicture will then give a false result, fx
Now the basic idea is to provide a separate path (which can be made visible during development) to control the decorations amplitude along the original (blue) curve. In this case the control path (red) would be quite simple:
The control path could be interpreted as a factor to the decorations amplitude that can be set via decoration=amplitude=.
Assuming this method would be quite handy I'm a bit stunned it is not available in TikZ - or have I overseen it? And if it's not: how can I get the y-value of the control curve within the statestep portion of the decorations definition?
The MWE producing all the above graphs (even if not nicely coded in terms of efficiency and structural beauty):
documentclassarticle
usepackagetikz
usetikzlibrarycalc,decorations.pathmorphing
newcounterrandymark
newcommandamplitudesetter
pgfdeclaredecorationmark random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymarkamplitudesetter
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
begindocument
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[blue!80!black,thick] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
renewcommandamplitudesetter%
pgfdecorationsegmentamplitude=0.75mm
ifnumvaluerandymark<48pgfdecorationsegmentamplitude=0.7mmfi%
ifnumvaluerandymark<46pgfdecorationsegmentamplitude=0.6mmfi%
ifnumvaluerandymark<44pgfdecorationsegmentamplitude=0.5mmfi%
ifnumvaluerandymark<42pgfdecorationsegmentamplitude=0.4mmfi%
ifnumvaluerandymark<40pgfdecorationsegmentamplitude=0.3mmfi%
ifnumvaluerandymark<38pgfdecorationsegmentamplitude=0.2mmfi%
ifnumvaluerandymark<36pgfdecorationsegmentamplitude=0.1mmfi%
ifnumvaluerandymark<34pgfdecorationsegmentamplitude=0mmfi%
ifnumvaluerandymark<8pgfdecorationsegmentamplitude=0.75mmfi%
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=2.5mm,y=2.5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
renewcommandamplitudesetter%
pgfdecorationsegmentamplitude=0.75mm
ifnumvaluerandymark<48pgfdecorationsegmentamplitude=0.7mmfi%
ifnumvaluerandymark<46pgfdecorationsegmentamplitude=0.6mmfi%
ifnumvaluerandymark<44pgfdecorationsegmentamplitude=0.5mmfi%
ifnumvaluerandymark<42pgfdecorationsegmentamplitude=0.4mmfi%
ifnumvaluerandymark<40pgfdecorationsegmentamplitude=0.3mmfi%
ifnumvaluerandymark<38pgfdecorationsegmentamplitude=0.2mmfi%
ifnumvaluerandymark<36pgfdecorationsegmentamplitude=0.1mmfi%
ifnumvaluerandymark<34pgfdecorationsegmentamplitude=0mmfi%
ifnumvaluerandymark<8pgfdecorationsegmentamplitude=0.75mmfi%
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw [red,thick,name=amplitudecontrol] (0,1) -- (2,1) -- (2,0) -- (7,0) -- (12,1) -- (25,1);
draw[blue!80!black,thick] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
endtikzpicture
enddocument
tikz-pgf decorations tikz-decorations
asked 14 hours ago
AndiWAndiW
3741212
Working with path decorations based on this solution provided by marmot I am searching for a possibility to change the decorations amplitude along the graph.
Having this plot
applying the mentioned decoration gives
which is exactly what the decoration is supposed to do.
In fact the required curve should look like this one:
The last output has been created by manually searching the correct positions to manipulate the amplitude which is a "trial and error" method. Changing the dimensions of the tikzpicture will then give a false result, fx
Now the basic idea is to provide a separate path (which can be made visible during development) to control the decorations amplitude along the original (blue) curve. In this case the control path (red) would be quite simple:
The control path could be interpreted as a factor to the decorations amplitude that can be set via decoration=amplitude=.
Assuming this method would be quite handy I'm a bit stunned it is not available in TikZ - or have I overseen it? And if it's not: how can I get the y-value of the control curve within the statestep portion of the decorations definition?
The MWE producing all the above graphs (even if not nicely coded in terms of efficiency and structural beauty):
documentclassarticle
usepackagetikz
usetikzlibrarycalc,decorations.pathmorphing
newcounterrandymark
newcommandamplitudesetter
pgfdeclaredecorationmark random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymarkamplitudesetter
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
begindocument
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[blue!80!black,thick] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
renewcommandamplitudesetter%
pgfdecorationsegmentamplitude=0.75mm
ifnumvaluerandymark<48pgfdecorationsegmentamplitude=0.7mmfi%
ifnumvaluerandymark<46pgfdecorationsegmentamplitude=0.6mmfi%
ifnumvaluerandymark<44pgfdecorationsegmentamplitude=0.5mmfi%
ifnumvaluerandymark<42pgfdecorationsegmentamplitude=0.4mmfi%
ifnumvaluerandymark<40pgfdecorationsegmentamplitude=0.3mmfi%
ifnumvaluerandymark<38pgfdecorationsegmentamplitude=0.2mmfi%
ifnumvaluerandymark<36pgfdecorationsegmentamplitude=0.1mmfi%
ifnumvaluerandymark<34pgfdecorationsegmentamplitude=0mmfi%
ifnumvaluerandymark<8pgfdecorationsegmentamplitude=0.75mmfi%
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=2.5mm,y=2.5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
renewcommandamplitudesetter%
pgfdecorationsegmentamplitude=0.75mm
ifnumvaluerandymark<48pgfdecorationsegmentamplitude=0.7mmfi%
ifnumvaluerandymark<46pgfdecorationsegmentamplitude=0.6mmfi%
ifnumvaluerandymark<44pgfdecorationsegmentamplitude=0.5mmfi%
ifnumvaluerandymark<42pgfdecorationsegmentamplitude=0.4mmfi%
ifnumvaluerandymark<40pgfdecorationsegmentamplitude=0.3mmfi%
ifnumvaluerandymark<38pgfdecorationsegmentamplitude=0.2mmfi%
ifnumvaluerandymark<36pgfdecorationsegmentamplitude=0.1mmfi%
ifnumvaluerandymark<34pgfdecorationsegmentamplitude=0mmfi%
ifnumvaluerandymark<8pgfdecorationsegmentamplitude=0.75mmfi%
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw [red,thick,name=amplitudecontrol] (0,1) -- (2,1) -- (2,0) -- (7,0) -- (12,1) -- (25,1);
draw[blue!80!black,thick] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
endtikzpicture
enddocument
tikz-pgf decorations tikz-decorations
tikz-pgf decorations tikz-decorations
asked 14 hours ago
AndiWAndiW
3741212
asked 14 hours ago
AndiWAndiW
3741212
asked 14 hours ago
AndiWAndiW
3741212
asked 14 hours ago
AndiWAndiW
3741212
asked 14 hours ago
AndiWAndiW
3741212
3741212
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
Let me start by saying that I really like that question and am truly impressed by what you have achieved. Here is a proposal to address the scalability. Define a function that governs the amplitude,
varyingamp(x) = whatever you like
where x is the fraction of the decorated path (in order to ensure scalability). (Such a function has been used already here in order to have variable varying line widths. I would not at all be surprised if similar things had been used before.) This is the MWE.
documentclassarticle
usepackagetikz
usetikzlibrarycalc,decorations.pathmorphing
newcounterrandymark
%newcommandamplitudesetter
pgfdeclaredecorationmark random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=
pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymark%amplitudesetter
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
pgfdeclaredecorationmark varying random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=
pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymark
pgfmathsetmacromyfractionthepgfdecorationsegmentlength*valuerandymark/pgfdecoratedpathlength
pgfmathsetmacromyamplitudevaryingamp(myfraction)
%typeoutmyfraction,myamplitude
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*myamplitude*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
begindocument
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[blue!80!black,thick] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark varying random y steps,segment
length=1.5mm,amplitude=0.75mm,declare function=
varyingamp(x)=ifthenelse(x<0.08,1,ifthenelse(x<0.28,0,ifthenelse(x<0.48,5*(x-0.28),1)));]%
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
draw[red,thick] plot[variable=x,domain=0:25,samples=101] (x,varyingamp(x/25));
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=2.5mm,y=2.5mm,decoration=mark varying random y
steps,segment length=0.75mm,amplitude=0.75mm,declare function=
varyingamp(x)=ifthenelse(x<0.08,1,ifthenelse(x<0.28,0,ifthenelse(x<0.48,5*(x-0.28),1)));]
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
enddocument
The function is shown in red in the second plot. The third plot shows scalability. (Of course, you also need to rescale the segment lengths. Notice also that this decoration has discrete steps, so if you have a strongly varying function but only a few steps, the function may not be fully "appreciated" since it only gets evaluated at a few points.)
answered 9 hours ago
marmotmarmot
109k5136255
1
+1 for this amazing answer, and I wish I could +1 another time for the first sentence only...
– JouleV
9 hours ago
@marmot you know you're driving me crazy, don't you? I did not even get a basic function implemented yet and you, well, uh. Ok, I'm digging through this one. Btw:xholds the fraction ofpgfdecoratedpathlength, right? Even if your approach is more elegant than mine it's not the red curve that controls the amplitude... Therefore I would like to keep the question still open if you don't mind...
– AndiW
9 hours ago
@JouleV absolutely the same oppinion here... 2x +1... :-)
– AndiW
9 hours ago
1
@AndiW Yes. What you are saying is correct, but is not contradicting with any of my statements, is it?
– marmot
5 hours ago
1
@marmot well - actually I sometimes forget that LaTeX is no low-level-end-user tool. Given the fact that it's a function controling the amplitude and not a graph (which would be something an end-user would expect) the answer is great. Having quit physics 25 yrs ago I have to change my approach I guess... :-) +1!
– AndiW
4 hours ago
|
show 8 more comments
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "85"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f479915%2ftikz-decoration-control-decoration-amplitude-along-curve%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Let me start by saying that I really like that question and am truly impressed by what you have achieved. Here is a proposal to address the scalability. Define a function that governs the amplitude,
varyingamp(x) = whatever you like
where x is the fraction of the decorated path (in order to ensure scalability). (Such a function has been used already here in order to have variable varying line widths. I would not at all be surprised if similar things had been used before.) This is the MWE.
documentclassarticle
usepackagetikz
usetikzlibrarycalc,decorations.pathmorphing
newcounterrandymark
%newcommandamplitudesetter
pgfdeclaredecorationmark random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=
pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymark%amplitudesetter
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
pgfdeclaredecorationmark varying random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=
pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymark
pgfmathsetmacromyfractionthepgfdecorationsegmentlength*valuerandymark/pgfdecoratedpathlength
pgfmathsetmacromyamplitudevaryingamp(myfraction)
%typeoutmyfraction,myamplitude
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*myamplitude*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
begindocument
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[blue!80!black,thick] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark varying random y steps,segment
length=1.5mm,amplitude=0.75mm,declare function=
varyingamp(x)=ifthenelse(x<0.08,1,ifthenelse(x<0.28,0,ifthenelse(x<0.48,5*(x-0.28),1)));]%
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
draw[red,thick] plot[variable=x,domain=0:25,samples=101] (x,varyingamp(x/25));
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=2.5mm,y=2.5mm,decoration=mark varying random y
steps,segment length=0.75mm,amplitude=0.75mm,declare function=
varyingamp(x)=ifthenelse(x<0.08,1,ifthenelse(x<0.28,0,ifthenelse(x<0.48,5*(x-0.28),1)));]
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
enddocument
The function is shown in red in the second plot. The third plot shows scalability. (Of course, you also need to rescale the segment lengths. Notice also that this decoration has discrete steps, so if you have a strongly varying function but only a few steps, the function may not be fully "appreciated" since it only gets evaluated at a few points.)
answered 9 hours ago
marmotmarmot
109k5136255
1
+1 for this amazing answer, and I wish I could +1 another time for the first sentence only...
– JouleV
9 hours ago
@marmot you know you're driving me crazy, don't you? I did not even get a basic function implemented yet and you, well, uh. Ok, I'm digging through this one. Btw:xholds the fraction ofpgfdecoratedpathlength, right? Even if your approach is more elegant than mine it's not the red curve that controls the amplitude... Therefore I would like to keep the question still open if you don't mind...
– AndiW
9 hours ago
@JouleV absolutely the same oppinion here... 2x +1... :-)
– AndiW
9 hours ago
1
@AndiW Yes. What you are saying is correct, but is not contradicting with any of my statements, is it?
– marmot
5 hours ago
1
@marmot well - actually I sometimes forget that LaTeX is no low-level-end-user tool. Given the fact that it's a function controling the amplitude and not a graph (which would be something an end-user would expect) the answer is great. Having quit physics 25 yrs ago I have to change my approach I guess... :-) +1!
– AndiW
4 hours ago
|
show 8 more comments
Let me start by saying that I really like that question and am truly impressed by what you have achieved. Here is a proposal to address the scalability. Define a function that governs the amplitude,
varyingamp(x) = whatever you like
where x is the fraction of the decorated path (in order to ensure scalability). (Such a function has been used already here in order to have variable varying line widths. I would not at all be surprised if similar things had been used before.) This is the MWE.
documentclassarticle
usepackagetikz
usetikzlibrarycalc,decorations.pathmorphing
newcounterrandymark
%newcommandamplitudesetter
pgfdeclaredecorationmark random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=
pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymark%amplitudesetter
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
pgfdeclaredecorationmark varying random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=
pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymark
pgfmathsetmacromyfractionthepgfdecorationsegmentlength*valuerandymark/pgfdecoratedpathlength
pgfmathsetmacromyamplitudevaryingamp(myfraction)
%typeoutmyfraction,myamplitude
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*myamplitude*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
begindocument
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[blue!80!black,thick] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark varying random y steps,segment
length=1.5mm,amplitude=0.75mm,declare function=
varyingamp(x)=ifthenelse(x<0.08,1,ifthenelse(x<0.28,0,ifthenelse(x<0.48,5*(x-0.28),1)));]%
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
draw[red,thick] plot[variable=x,domain=0:25,samples=101] (x,varyingamp(x/25));
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=2.5mm,y=2.5mm,decoration=mark varying random y
steps,segment length=0.75mm,amplitude=0.75mm,declare function=
varyingamp(x)=ifthenelse(x<0.08,1,ifthenelse(x<0.28,0,ifthenelse(x<0.48,5*(x-0.28),1)));]
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
enddocument
The function is shown in red in the second plot. The third plot shows scalability. (Of course, you also need to rescale the segment lengths. Notice also that this decoration has discrete steps, so if you have a strongly varying function but only a few steps, the function may not be fully "appreciated" since it only gets evaluated at a few points.)
answered 9 hours ago
marmotmarmot
109k5136255
1
+1 for this amazing answer, and I wish I could +1 another time for the first sentence only...
– JouleV
9 hours ago
@marmot you know you're driving me crazy, don't you? I did not even get a basic function implemented yet and you, well, uh. Ok, I'm digging through this one. Btw:xholds the fraction ofpgfdecoratedpathlength, right? Even if your approach is more elegant than mine it's not the red curve that controls the amplitude... Therefore I would like to keep the question still open if you don't mind...
– AndiW
9 hours ago
@JouleV absolutely the same oppinion here... 2x +1... :-)
– AndiW
9 hours ago
1
@AndiW Yes. What you are saying is correct, but is not contradicting with any of my statements, is it?
– marmot
5 hours ago
1
@marmot well - actually I sometimes forget that LaTeX is no low-level-end-user tool. Given the fact that it's a function controling the amplitude and not a graph (which would be something an end-user would expect) the answer is great. Having quit physics 25 yrs ago I have to change my approach I guess... :-) +1!
– AndiW
4 hours ago
|
show 8 more comments
Let me start by saying that I really like that question and am truly impressed by what you have achieved. Here is a proposal to address the scalability. Define a function that governs the amplitude,
varyingamp(x) = whatever you like
where x is the fraction of the decorated path (in order to ensure scalability). (Such a function has been used already here in order to have variable varying line widths. I would not at all be surprised if similar things had been used before.) This is the MWE.
documentclassarticle
usepackagetikz
usetikzlibrarycalc,decorations.pathmorphing
newcounterrandymark
%newcommandamplitudesetter
pgfdeclaredecorationmark random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=
pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymark%amplitudesetter
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
pgfdeclaredecorationmark varying random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=
pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymark
pgfmathsetmacromyfractionthepgfdecorationsegmentlength*valuerandymark/pgfdecoratedpathlength
pgfmathsetmacromyamplitudevaryingamp(myfraction)
%typeoutmyfraction,myamplitude
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*myamplitude*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
begindocument
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[blue!80!black,thick] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark varying random y steps,segment
length=1.5mm,amplitude=0.75mm,declare function=
varyingamp(x)=ifthenelse(x<0.08,1,ifthenelse(x<0.28,0,ifthenelse(x<0.48,5*(x-0.28),1)));]%
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
draw[red,thick] plot[variable=x,domain=0:25,samples=101] (x,varyingamp(x/25));
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=2.5mm,y=2.5mm,decoration=mark varying random y
steps,segment length=0.75mm,amplitude=0.75mm,declare function=
varyingamp(x)=ifthenelse(x<0.08,1,ifthenelse(x<0.28,0,ifthenelse(x<0.48,5*(x-0.28),1)));]
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
enddocument
The function is shown in red in the second plot. The third plot shows scalability. (Of course, you also need to rescale the segment lengths. Notice also that this decoration has discrete steps, so if you have a strongly varying function but only a few steps, the function may not be fully "appreciated" since it only gets evaluated at a few points.)
answered 9 hours ago
marmotmarmot
109k5136255
Let me start by saying that I really like that question and am truly impressed by what you have achieved. Here is a proposal to address the scalability. Define a function that governs the amplitude,
varyingamp(x) = whatever you like
where x is the fraction of the decorated path (in order to ensure scalability). (Such a function has been used already here in order to have variable varying line widths. I would not at all be surprised if similar things had been used before.) This is the MWE.
documentclassarticle
usepackagetikz
usetikzlibrarycalc,decorations.pathmorphing
newcounterrandymark
%newcommandamplitudesetter
pgfdeclaredecorationmark random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=
pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymark%amplitudesetter
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
pgfdeclaredecorationmark varying random y stepsstart
%
statestart[width=+0pt,next state=step,persistent precomputation=
pgfdecoratepathhascornerstruesetcounterrandymark0]
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpoint0pt0pt
%
statestep[auto end on length=1.5pgfdecorationsegmentlength,
auto corner on length=1.5pgfdecorationsegmentlength,
width=+pgfdecorationsegmentlength]
stepcounterrandymark
pgfmathsetmacromyfractionthepgfdecorationsegmentlength*valuerandymark/pgfdecoratedpathlength
pgfmathsetmacromyamplitudevaryingamp(myfraction)
%typeoutmyfraction,myamplitude
pgfcoordinaterandymarkarabicrandymarkpgfpointpgfdecorationsegmentlengthrand*myamplitude*pgfdecorationsegmentamplitude
%
statefinal
stepcounterrandymark
pgfcoordinaterandymarkarabicrandymarkpgfpointdecoratedpathlast%
%
%
begindocument
begintikzpicture[x=5mm,y=5mm,decoration=mark random y steps,segment length=1.5mm,amplitude=0.75mm]% original curve
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[blue!80!black,thick] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
endtikzpicture
vspace2ex
begintikzpicture[x=5mm,y=5mm,decoration=mark varying random y steps,segment
length=1.5mm,amplitude=0.75mm,declare function=
varyingamp(x)=ifthenelse(x<0.08,1,ifthenelse(x<0.28,0,ifthenelse(x<0.48,5*(x-0.28),1)));]%
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
draw[red,thick] plot[variable=x,domain=0:25,samples=101] (x,varyingamp(x/25));
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
vspace2ex
begintikzpicture[x=2.5mm,y=2.5mm,decoration=mark varying random y
steps,segment length=0.75mm,amplitude=0.75mm,declare function=
varyingamp(x)=ifthenelse(x<0.08,1,ifthenelse(x<0.28,0,ifthenelse(x<0.48,5*(x-0.28),1)));]
draw[style=help lines] (0,-4) grid[step=5mm] (25,1);
pgfmathsetseed2
draw[black] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
path[decorate] (0,0) -- (2,0) to [out=0,in=180](4,-3.5) to [out=0,in=225](6,-1.75) to [out=45,in=180](11,0) -- (24.25,0);
draw[blue!80!black,thick] plot[variable=x,samples at=1,...,arabicrandymark,smooth] (randymarkx);
endtikzpicture
enddocument
The function is shown in red in the second plot. The third plot shows scalability. (Of course, you also need to rescale the segment lengths. Notice also that this decoration has discrete steps, so if you have a strongly varying function but only a few steps, the function may not be fully "appreciated" since it only gets evaluated at a few points.)
answered 9 hours ago
marmotmarmot
109k5136255
answered 9 hours ago
marmotmarmot
109k5136255
answered 9 hours ago
marmotmarmot
109k5136255
answered 9 hours ago
marmotmarmot
109k5136255
109k5136255
1
+1 for this amazing answer, and I wish I could +1 another time for the first sentence only...
– JouleV
9 hours ago
@marmot you know you're driving me crazy, don't you? I did not even get a basic function implemented yet and you, well, uh. Ok, I'm digging through this one. Btw:xholds the fraction ofpgfdecoratedpathlength, right? Even if your approach is more elegant than mine it's not the red curve that controls the amplitude... Therefore I would like to keep the question still open if you don't mind...
– AndiW
9 hours ago
@JouleV absolutely the same oppinion here... 2x +1... :-)
– AndiW
9 hours ago
1
@AndiW Yes. What you are saying is correct, but is not contradicting with any of my statements, is it?
– marmot
5 hours ago
1
@marmot well - actually I sometimes forget that LaTeX is no low-level-end-user tool. Given the fact that it's a function controling the amplitude and not a graph (which would be something an end-user would expect) the answer is great. Having quit physics 25 yrs ago I have to change my approach I guess... :-) +1!
– AndiW
4 hours ago
|
show 8 more comments
1
+1 for this amazing answer, and I wish I could +1 another time for the first sentence only...
– JouleV
9 hours ago
@marmot you know you're driving me crazy, don't you? I did not even get a basic function implemented yet and you, well, uh. Ok, I'm digging through this one. Btw:xholds the fraction ofpgfdecoratedpathlength, right? Even if your approach is more elegant than mine it's not the red curve that controls the amplitude... Therefore I would like to keep the question still open if you don't mind...
– AndiW
9 hours ago
@JouleV absolutely the same oppinion here... 2x +1... :-)
– AndiW
9 hours ago
1
@AndiW Yes. What you are saying is correct, but is not contradicting with any of my statements, is it?
– marmot
5 hours ago
1
@marmot well - actually I sometimes forget that LaTeX is no low-level-end-user tool. Given the fact that it's a function controling the amplitude and not a graph (which would be something an end-user would expect) the answer is great. Having quit physics 25 yrs ago I have to change my approach I guess... :-) +1!
– AndiW
4 hours ago
1
1
+1 for this amazing answer, and I wish I could +1 another time for the first sentence only...
– JouleV
9 hours ago
+1 for this amazing answer, and I wish I could +1 another time for the first sentence only...
– JouleV
9 hours ago
@marmot you know you're driving me crazy, don't you? I did not even get a basic function implemented yet and you, well, uh. Ok, I'm digging through this one. Btw:
x holds the fraction of pgfdecoratedpathlength, right? Even if your approach is more elegant than mine it's not the red curve that controls the amplitude... Therefore I would like to keep the question still open if you don't mind...– AndiW
9 hours ago
@marmot you know you're driving me crazy, don't you? I did not even get a basic function implemented yet and you, well, uh. Ok, I'm digging through this one. Btw:
x holds the fraction of pgfdecoratedpathlength, right? Even if your approach is more elegant than mine it's not the red curve that controls the amplitude... Therefore I would like to keep the question still open if you don't mind...– AndiW
9 hours ago
@JouleV absolutely the same oppinion here... 2x +1... :-)
– AndiW
9 hours ago
@JouleV absolutely the same oppinion here... 2x +1... :-)
– AndiW
9 hours ago
1
1
@AndiW Yes. What you are saying is correct, but is not contradicting with any of my statements, is it?
– marmot
5 hours ago
@AndiW Yes. What you are saying is correct, but is not contradicting with any of my statements, is it?
– marmot
5 hours ago
1
1
@marmot well - actually I sometimes forget that LaTeX is no low-level-end-user tool. Given the fact that it's a function controling the amplitude and not a graph (which would be something an end-user would expect) the answer is great. Having quit physics 25 yrs ago I have to change my approach I guess... :-) +1!
– AndiW
4 hours ago
@marmot well - actually I sometimes forget that LaTeX is no low-level-end-user tool. Given the fact that it's a function controling the amplitude and not a graph (which would be something an end-user would expect) the answer is great. Having quit physics 25 yrs ago I have to change my approach I guess... :-) +1!
– AndiW
4 hours ago
|
show 8 more comments
Thanks for contributing an answer to TeX - LaTeX Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f479915%2ftikz-decoration-control-decoration-amplitude-along-curve%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
